Now restoring the old door or cleaning it has become quite an easy task. This article will acquire knowledge on how to restore your shabby doors and make them useable again.
Here Are Some Materials and Tools That You Will Need to Clean and Restore the Doorknob:
- Your Door Hardware
- Metal Spray paint of your preference.
Tools that you will need for door repair and restoring the shabby Knob:
- Slow Cooker
- Disposable metal container,
- Dish soap
- Rubber gloves
- Toothpicks and pins
- Metal polish. (You can use commercial polish or use homemade polish)
- The surface that you will use to spray on.
Now that you know what you need, we can step forward towards the steps of re-finishing and clean knobs and Hardware.
Step to Re-Finish & Clean the Hardware or Doorknobs
Step 1: Removing the Hardware:
Door repair or cleaning may take quite some time to complete, especially when you use your DIY tools for the same. If you don’t feel confident about the entire work, you will always find professional help offering the town’s best door repair services. You can hire them for door repair and services because doors are the main entry points of your home and you should not compromise with your safety and security.
You will need to remove the paint from the side of the Knob. Use a sharp knife to clear the paint from the edge of the plates. This will restrain a large portion of color coming from the Door. You will have to remove the paints from the screwhead as well so that the screwdriver can get in and open the pin. The next step will be to loosen the screw present on the knob and spindle. The last step of removal is removing the plates and spindle.
Step 2: Clearing the Paint:
You will always have the option of removing the paint from the Knob by scraping, but it has a high chance of damaging the Knob and leaving the trails of color. The best way to removing the paint is a slow cooker.
You must take a Metal container (Disposable) and put the Hardware into it. Now take some dish soap and mix with water and pour the solution into the container. Put the container inside the slow Cooker and leave it overnight. Next, you will have to wear gloves, take out the container from the cooker and scrub them to remove the paint from your doorknobs.
Step 3: Cleaning the Metal:
Once you finish scrubbing, take out the container from the cooker and rinse the Knob thoroughly to clear the paint and remaining paint—Polish the metal to eliminate corrosion or lose rust. The last step is to give a proper wash and dry the Knob thoroughly.
Step 4: Paint & Re-Installation:
You can choose your favorite color to paint the Hardware. For a good result, do not forget to follow the instructions. Once you finish painting, you can leave these knobs to dry. You can re-install the Hardware or Knob the way you have opened the Knob. You must apply the reverse method for the same.
You can hire the company that is proffering the door repair service if you do not feel comfortable with this task. You should not use a damaged door which is get affected by wear and tear. You should replace your door if it is affected massively. You can hire door repair services to repair your locks because you cannot repair your locks without any prior knowledge.